Enclosures

Alumimium Radio Frequency and Microwave enclosures

  • Solid aluminium case
  • 3 SMA ports
  • Blind cover plates for not used ports
  • Turret solder terminal and feed trough capacitor
  • 35 x 35 x 20 mm
  • For all radio frequency applications

These RF enclosures are designed with prototyping and small series production in mind. They are produced by CN...

Alumimium Radio Frequency and Microwave enclosures

  • Solid aluminium case
  • 3 SMA ports
  • Blind cover plates for not used ports
  • Turret solder terminal and feed trough capacitor
  • 35 x 35 x 20 mm
  • For all radio frequency applications

These RF enclosures are designed with prototyping and small series production in mind. They are produced by CNC milling of a block of aluminum. The result is a solid aluminum enclosure with very tight tolerances and very good heat sink capabilities as well. The system has three SMA ports, a turret terminal for ground, and a feed trough capacitor for applying power. All ports and terminals can be covered with plates when not in use.


The aluminum case has an inner bank to support a PCB while making contact with its ground plane all around it. The bank is positioned along the SMA connector holes, which improves the RF connection of the SMA ports to the PCB.


The SMA connectors are removable so that the PCB can be replaced easily with a new version. Of course, the top and bottom plates are removable. There is also room for components at the bottom, beside the PCB in a confined area (defined by the aluminum bank).

More

Enclosures  There are 4 products.

Subcategories

  • Accessories

    Accessories for the aluminium RF enclosure 'Mini'.

Showing 1 - 4 of 4 items
Showing 1 - 4 of 4 items