Based on a resistive bridge design; excellent performance at the HF, VHF...
Based on a resistive bridge design; excellent performance at the HF, VHF...
A DC-block blocks DC content from an AC signal. It is used to to protect sensitive equipment or to minimize DC signals that would otherwise influence the performance of the system or stage the signal is fed to.
A DC block is used to protect sensitive equipment from any DC component or to improve measurement accuracy by removing any DC offset that may otherwise influence a measurement device negatively.
DC block with an inner block design with very low cutoff frequency.
DC block with an inner block design with very low cutoff frequency.
This module features two mounting flanges.