Quantity:
Total:
Total products: (tax excl.)
Total shipping: (tax excl.) To be determined
Total: (tax excl.)
Broad range of RF & Microwave modules. Typical use is in test and measurement systems, RF design, research facilities and universities. All modules are constructed from a machined aluminum housing with excellent mechanical, EM shielding and thermal properties. They all use SMA connectors.
The RF & Microwave modules are divided in several subcategories.
DC block with an inner block design with very low cutoff frequency. Frequency range : 20 KHz - 6 GHz Insertion loss < 1.0 dB Return loss < -20 dB Maximum power : 0.4 W Maximum voltage : 50V This module features two mounting flanges.
Resistive splitter in 3R configuration Frequency range : 0 - 6 GHz Insertion loss and isolation : 6 dB Return loss > 20 dB Maximum power : 0.3 W Maximum voltage : 50V This module features two mounting flanges.
Wilkinson splitter based design Bandwidth : 0.2 - 500 MHz Insertion loss : < 3.7 dB Amplitude imbalance : 0.1 dB Isolation (S23) : > 20 dB Return loss at P1 : > 20 dB Return loss at P2, P3 : > 25 dB Maximum power : 0.2 W Maximum voltage : 50V
Based on a resistive bridge design; excellent performance at the HF, VHF and well into the UHF band. Bandwidth : 1 - 1000 MHz Insertion loss : 6 dB Isolation (S23) : > 40 dB Maximum power : 0.2 W Maximum voltage : 50V This module features two mounting flanges.
Based on a resistive bridge design; excellent performance at the HF, VHF and well into the UHF band. Bandwidth : 1 - 1000 MHz Insertion loss : 6 dB Coupling : 6 dB Excellent directivity Return loss at P1 (DUT port) : > -25 dB Maximum power : 0.2 W Maximum voltage : 50V This module features two mounting flanges.
Low noise amplifier, very linear, flat gain of 19dB, 3GHz Frequency range : 30Mhz - 3GHz Gain 19 dB (+0 / -1dB) Noise figure : 1.8 dB Very linear IP3 : 35 dB IP1 : 19 dB Power supply : 3.5 - 6.5V, 55 mA This module features two mounting flanges.
Wilkinson splitter based design Bandwidth : 0.2 - 500 MHz Insertion loss : < 3.7 dB Amplitude imbalance : 0.1 dB Isolation (S23) : > 20 dB Return loss at P1 : > 20 dB Return loss at P2, P3 : > 25 dB Maximum power : 0.2 W Maximum voltage : 50V This module features two mounting flanges.
Low noise amplifier, very linear, flat gain of 19dB, 3GHz Frequency range : 30Mhz - 3GHz Gain : 19 dB (+0 / -1dB) Noise figure : 1.8 dB Very linear IP3 : 35 dB IP1 : 19 dB Power supply : 3.5 - 6.5V, 55 mA
Based on a resistive bridge design; excellent performance at the HF, VHF and well into the UHF band. Bandwidth : 1 - 1000 MHz Insertion loss : 4 dB Coupling : 10 dB Excellent directivity Return loss at P1 (DUT port) : < -25 dB Maximum power : 0.2 W Maximum voltage : 50V
Based on a resistive bridge design; excellent performance at the HF, VHF and well into the UHF band. Bandwidth : 1 - 1000 MHz Insertion loss : 4 dB Coupling : 10 dB Excellent directivity Return loss at P1 (DUT port) : > -25 dB Maximum power : 0.2 W Maximum voltage : 50V This module features two mounting flanges.
