» Do not allow new products at this time.
RF & Microwave Products
Subcategories
Alumimum Radio Frequency and Microwave enclosures for RF applications, RF prototyping, and as an RF test fixture.
There are two versions:These RF enclosures are designed with prototyping and small series production in mind. They are produced by CNC milling of a block of aluminum. The result is a solid aluminum enclosure with very tight tolerances and very good EM shielding capabilities. The system has SMA ports, a turret terminal for ground, and a feed trough capacitor for applying power. All ports and terminals can be covered with plates when not in use.
The SMA connectors are removable so that the PCB can be replaced easily with a new version. the top and bottom plates are removable. There is also room for components at the bottom of the PCB.
Radio Frequency & Microwave modules in several categories.
This module features two mounting flanges.
Wilkinson splitter based design
Based on a resistive bridge design; excellent performance at the lower end of the spectrum.
Based on a resistive bridge design; excellent performance at the lower end of the spectrum.
Low noise amplifier, very linear, flat gain of 20dB, 1GHz
Bias-T, 100KHz - 6GHz
DC block with an inner block design with very low cutoff frequency.
This module features two mounting flanges.
This module features two mounting flanges.
A turret terminal compatible with Gquipment RF Mini enclosures. Used to solder a current return (ground) cable to the enclosure.
Wilkinson splitter based design
Based on a resistive bridge design; excellent performance at the HF, VHF and well into the UHF band.
Based on a resistive bridge design; excellent performance at the HF, VHF and well into the UHF band.